I did a fair amount of little things today, but not much picture- or blog-worthy. I did thread my clutch and throttle cables, as well as my speedo sensor wires. Here are the cables coming out of the rear firewall (before I permanently attached the speedo sender and wiring):
And here is a very bad, blurry picture of the final speedo sender hookup - approximately the same location as above, but screwed into the firewall. The black, red, and white wires from the speedo sender hook up to the brown, green, and yellow wires, respectively, in the 3-in-1 wiring harness I found at some auto parts store. There is a terminal block in between to keep everything nice and neat:
And here is a very bad, blurry picture of the final speedo sender hookup - approximately the same location as above, but screwed into the firewall. The black, red, and white wires from the speedo sender hook up to the brown, green, and yellow wires, respectively, in the 3-in-1 wiring harness I found at some auto parts store. There is a terminal block in between to keep everything nice and neat:
No comments:
Post a Comment